JUUPINE 2025 New Upgraded GECO Plate for Bambu Lab X2D/P2S/P1P/P1S/X1C/X1/X1E/A1 3D Printer,PLA Cold Plate X2D (No Heating) 257X257mm Magnetic Spring Steel 0℃ Printing Hot Bed No Glue Required.
Product details
| Management number | 228082635 | Release Date | 2026/05/31 | List Price | $8.92 | Model Number | 228082635 | ||
|---|---|---|---|---|---|---|---|---|---|
| Category | |||||||||
- No Heat Required:Specially manufactured for PLA,no need to wait for heating up the hot bed.Just set the printing plate to 1°C,with less power,it can save you more energy and reduce printing costs.The GECO Plate is also the first choice for farmers to print,stable printing, energy saving and reduce spaghetti.Note:It can only be used to print PLA filaments, and no other filaments can be printed.
- Reusable,Perfect Adhesion:Do not heat the Geco Plate above 40°C and remember to adjust the hot bed temperature before printing.It has excellent adhesion without heating the platform,The model can be firmly attached to the GECO surface,Even beginners can print easily.Long term printing can still maintain 100% perfect adhesion,say goodbye to glue and spray, make every printing process smooth and effortless.
- Stable endurance, long-term use:GECO stabilizing coating is very durable and maintains stable adhesion evenafter long-term use. lt extends the service life of the printing plate and reducesthe cost of 3D printing.which is more low-carbon and environmentally friendly.After 400+ prints, the adhesion of the GECO printing plate is still about 80%.
- Thicker and heavier:Our GECO plate for bambu lab 3d printer is thicker and heavier than the regular PEI carbon plate. Thick and magnetic can make large prints do not warp, small and tall prints do not fall.
- Easy to Remove Models:High quality spring steel is the main supporting structure,most of the time, you can easily get the model out without bending or any tools, if it's stuck, you can bend the GECO plate slightly, take the model, and then it will return to being flat.
- Simple Daily Maintenance:Before printing, you can clean the GECO plate by wiping it with alcohol or using soapy water to remove dust, oil, and fingerprints, and then Select "Textured PEI Plate" and set temperature to plate.
- Note:Our "no heating" is the result of testing at room temperature of about 20℃. If your room temperature is very low, please increase the temperature to 20-40℃. If the object you print is a batch of mini object or a large object, it is recommended to add a brim or increase the temperature.
- Widely Compatible:It is suitable for Bambu Lab P2SX2D//P1P/P1S/X1C/X1/X1E/A1 3D Printer.GECO plate has a beautiful surface texture and a full sci-fi style.The print will not transfer the surface texture,which can keep the bottom ofyour print delicate and uniform with coordinated texture
- Maintain Build Plate:After long-term repeated use, the plate needs to be repaired and cleaned. After long-term repeated use, the print build plate needs maintenance and cleaning. After cleaning, set the hot bed to 55℃ to heat the build plate, which will restore the adhesion of the build plate to its original state. (No printing is required during the maintenance process)
| ASIN | B0DSPW6ZW4 |
|---|---|
| Item Weight | 14.4 ounces |
| Manufacturer | Wefuit |
| Package Dimensions | 11.2 x 10.5 x 0.25 inches |
Bestseller ranking
Anatomy
Customers who viewed this product also viewed
3D Printer Platforms
Correction of product information
If you notice any omissions or errors in the product information on this page, please use the correction request form below.
Correction Request Form